Logo

Operation and Maintenance of Circuit Breakers and Switchgears

Introduction

Operation and Maintenance of Circuit Breakers and Switchgears

Course Objectives

This course is designed to enable participants to:

• List the voltage convention classifications used in this course.
• Describe switchgear construction.
• Describe a ground fault relay system.
• Describe the three basic types of low and medium voltage circuit breaker contacts.
• Describe the molded case circuit breaker.

Course Outlines

General Introduction

• Electrical engineering basic concepts
• Three phase review and per unit
• Voltage levels
• One line and three line diagram
• Generation system layout
• Transmission system layout
• Substation system layout
• Distribution system layout

Industrial Switchgears

• Fuses
• Auto-reclosers
• Automatic sectionalizer
• Circuit Breakers
• Isolator switches
• Load switches
• Relays
• Current transformers
• Voltage transformers

CB Design Specification Based on Short Circuit Current Level

• Per unit system
• Faults on power systems
• Transient phenomena in power system.
• Symmetrical component analysis of three phase network
• Network connection for various fault types
• Current and voltage distribution in system due to a fault
• Effect of system on zero sequence quantities
• Computer programs based short circuit calculation.

CB Design Specification Based on Arc Phenomena and Circuit Interruption

• Arc phenomena
• Maintenance of the Arc
• Properties of Arc
• Arc Interruption theory
• Circuit Breaker Rating
• Circuit constants and circuit conditions
• Conditions of severity
• Restriking voltage transient
• Class A ultra fast transients
• Class B system transients
• Class C low transients
• Transmission line transient
• Switching transients
• Duties of Switchgear

LV Circuit Breakers

• Low voltage molded case current limiting circuit breakers
• Low voltage molded case circuit breakers with high breaking capacity
• Insulated case circuit breakers
• Low voltage air circuit breakers
• Low voltage circuit breakers specification

Modern MV and HV Vacuum CB

• Introduction
• Advantages of vacuum interruption
• Vacuum contactors and interrupters
• The vacuum medium
• The vacuum arc
• Vacuum arc stability
• Vacuum break down
• Vacuum switch construction
• Applications of vacuum circuit breakers

Modern MV and HV SF6 CB Introduction

• Basic Features of SF6 Breakers
• Dielectric properties of SF6
• Quenching properties of SF6
• Construction of SF6 breaker
• SF6 CB types
• Puffer type SF6 breakers
• Double Pressure System
• Single Pressure Puffer-Piston System
• Single Pressure Self Blast System
• Improvement in SF6 Breakers for HV

Other Type of Circuit Breakers

Air Circuit Breakers

• Method of increasing arc resistance
• Plan break type
• Magnetic blow out type
• Arc splitter type
• Application
• Construction and operation
• Axial air CB
• Blast air CB

Oil Circuit Breakers

• Arc rupture under oil
• Advantages of oil
• Disadvantages of oil
• Plan break oil circuit breakers
• Arc control circuit oil breakers
• Minimum oil circuit breakers
• Construction and operation

Dc Circuit Breakers

• Construction
• Methods of interruption
• Application

Circuit Breaker Inspection, Maintenance and Services

• Inspection
• General inspection technical procedure
• Daily inspection of circuit breakers
• Monthly inspection of circuit breakers
• Annual inspection of circuit breakers
• Disassembly
• Cleaning
• Tightening
• Lubrication
• Equipments used in testing
• Testing procedure
• Direct testing
• Contact resistance test.
• Insulation resistance test
• Test report
• Indirect testing
• One hour Video, HV CB Maintenance and Repair)

Circuit Breakers Control, Protection and Testing

• Switchgears control devices and wiring
• Switchgears protection devices and wiring
• Testing Classification
• Testing laboratories
• Description of a simple testing station

CB Troubleshooting

• Low insulation Resistance (below 2000 Mega-ohms) between a) Phase terminal and earthed frame, with breaker closed b) Phase terminals of a pole.
• Resistance between Termi¬nals of Pole too high (above 100 microhms) (15 micro-ohm per joint) contact
• Unequal contact Wipe and Travel in 3-pole Measured from top surface of inter¬rupter flange and the contact lip by a simple rod with a) breaker open and b) breaker closed
• One of the pole docs not close.