العربية
0096522958111

Logo

Find A programme

Subsurface Production Operations and Artificial Lift Technologies

Dates Venues Register
24/01/2027 - 28/01/2027 DOHA

Introduction

Subsurface Production Operations and Artificial Lift Technologies

 

What are the Goals?

By the end of this Subsurface Production Operations & Artificial Lift Technologies training course, participants will learn to:

  • Apply and gain an in-depth knowledge on subsurface production operations
  • Discuss the inflow and outflow performances
  • Make analysis & evaluation of formation damage and its effect on production performance
  • Improve the technical background about formation damage in terms of causes, prevention and finding remedies & solutions. 
  • Describe perforation methods, formation damage, matrix acidizing and hydraulic fracturing
  • Apply and gain proper techniques on artificial lift systems and optimization technology
  • Discuss gas lift systems, ESP systems, sucker rod pumping, jet pumps, hydraulic pumps and progressive cavity pumps.
  • Discuss criteria for artificial lift system selection and artificial lift screening methods
  • Select the appropriate artificial lift system
  • Compare systems to determine what system is most economically feasible.
  • Specify components and auxiliary equipment needed for each system
  • Classify best practices available to extend the life of equipment and installed lift systems
  • Design system features that allow for gassy production, production with solids, viscous production, and for other harsh environments

Who is this Training Course for?

This GLOBAL FRANCHISE Subsurface Production Operations & Artificial Lift Technologies training course is suitable to a wide range of professionals but will greatly benefit:

  • Petroleum and production engineers
  • Completion, reservoir and drilling engineers concerned with well performance & production enhancement facilities
  • Supervisors, field operators and technicians
  • Other company staff involved in subsurface production operations
  • Petroleum engineers who are new to the profession
  • Managers and government officials and others involved with the production systems
  • Technical and operations staff from other disciplines, who require a cross-training to or a basic understanding of the subsurface production operations

 

Daily Agenda

Day 1: Reservoir Performance – Inflow and Outflow Relationships
  • Reservoir performance: wellbore and reservoir performance overview
  • Pressure loss in the wellbore 
  • Well productivity
  • Concepts of productivity index
  • Inflow and outflow relationships
Day 2: Formation Damage
  • Formation damage 
  • Well production problems: asphaltenes, waxes, hydrates, inorganic, scale formation, corrosion
  • Drilling-induced formation damage
  • Damage mechanisms - how are sandstones and carbonates damaged, how do formation mineralogy and clay chemistry influence damage, what about scale, paraffin .. Etc.
  • Formation damage causes: formation damage caused by completion and workover fluids: damage during perforating and cementing, formation damage caused by fines mitigation, formation damage caused by swelling clays, formation damage in injection wells, formation damage resulting from paraffins and asphaltenes, formation damage resulting form emulsion and sludge formation,  formation damage resulting from condensate banking, formation damage resulting from gas breakout, formation damage resulting from water blocks, formation damage resulting for wettability alteration, bacterial plugging
Day 3: Stimulation Operations / Why and When do we need Artificial Lift?
  • Damage prevention
  • Evaluation of damage - production performance, and pressure analysis review
  • Damage removal: two basic acidizing treatments and acidizing materials and methods
  • Damage removal by chemical solvents 
  • Acid type and concentration 
  • Evaluation of acid treatments
  • Impact of changing well conditions and need for artificial lift
  • Overview of artificial lift technology : sucker road pump design, hydraulic pump design, jet pump, gas lift, Electric Submersible Pump (ESP)
  • Application of artificial lift technology and its limitations
  • Artificial lift screening methods
Day 4: Sucker Rod Pumping and Gas Lift System
  • Sucker rod pump concept
  • Limitations and advantages of the sucker rod pumping system
  • Components of the sucker rod pump
  • Design of the sucker rod pump
  • Troubleshooting of the sucker rod pump systems
  • Gas lift concept
  • Gas lift types: continuous and intermittent gas lift
  • Main components of the gas list system: mandrels and  valves
  • Gas lift design
  • Effects of temperature and chokes
  • Valve spacing
  • Equilibrium curve and continuous flow design
  • Injection gas requirements
  • Limitation and advantages of the gas lift system
Day 5: ESP System, Hydraulic & Jet Pumping and PCP systems
  • Concept of the Electric Submersible Pump (ESP) system
  • Equipment and accessories of the ESP systems
  • ESP design: pump performance curves, pump intake curves, typical problems, installation, troubleshooting ; best practices for installation and maintenance;
  • Steps to correctly size an ESP system. basic sizing principles for the pump, motor and cable
  • Importance of correctly matching well productivity to pump performance
  • Use of data to diagnose well/equipment problems
  • Limitation and advantages of the ESP system
  • Concept of the hydraulic pumps
  • Limitation and advantages of the hydraulic pumps
  • Concept of the jet pumping
  • Limitation and advantages of the jet pumps
  • Concept of the Progressing Cavity Pump (PCP) pumps
  • Limitation and advantages of the PCP pumps
  • Best practices for installation and maintenance
  • Criteria for selection of artificial lift systems and artificial lift screening methods

Make an enquiry about seminar

Subject Areas

Locations

Live chat by BoldChat